Arp Inspection; Chapter 64 Arp Inspection; Arp Inspection Status - ZyXEL Communications GS1920v2 Series User Manual

64.1 ARP Inspection Status

Use this screen to look at the current list of MAC address filters that were created because the Switch
identified an unauthorized ARP packet. When the Switch identifies an unauthorized ARP packet, it
automatically creates a MAC address filter to block traffic from the source MAC address and source
VLAN ID of the unauthorized ARP packet. To open this screen, click SECURITY > IPv4 Source Guard > ARP
Inspection > ARP Insp. Status.
Figure 291
The following table describes the labels in this screen.
Table 226 SECURITY > IPv4 Source Guard > ARP Inspection > ARP Insp. Status
LABEL
Total Number of
Bindings
Index
MAC Address
VID
Port
Expiry (sec)
Delete
Cancel

Chapter 64 ARP Inspection

SECURITY > IPv4 Source Guard > ARP Inspection > ARP Insp. Status
DESCRIPTION
This field displays the current number of MAC address filters that were created because the
Switch identified unauthorized ARP packets.
This field displays a sequential number for each MAC address filter.
This field displays the source MAC address in the MAC address filter.
This field displays the source VLAN ID in the MAC address filter.
This field displays the source port of the discarded ARP packet.
This field displays how long (in seconds) the MAC address filter remains in the Switch. You
can also delete the record manually (Delete).
Select an entry's check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Click this to remove the selected entries.
Click this to clear the Delete check boxes above.
GS1920v2 Series User's Guide
C
H A P T E R

ARP Inspection

403
64