Network Tab; Common Setting - Tcp/Ip - Konica Minolta bizhub c200 User Manual

Assistant tool for C200
3.4.4

Network tab

From the Network tab, information and settings concerning network connections can be specified.

Common Setting - TCP/IP

Specify the TCP/IP settings.
Item
TCP/IP Setting
DHCP Setting
IP Address
Subnet Mask
Default Gateway
RAW Port
RAW Port Number
DNS Settings
Host Name
Domain Name
DNS Server Ad-
dress 1-3
DNS Query Timeout
SLP Setting
LPD Setting
Reminder
In order to apply changes to the settings for parameters marked with
(turn it off, then on again).
When the machine is turned off, then on again, turn the machine off with the sub power switch before
turning off the main power switch. In addition, wait at least 10 seconds to turn the machine on after
turning it off; otherwise, the machine may not operate correctly.
C200
Description
Select whether or not TCP/IP is used.
Select whether or not DHCP is used.
Type in the IP address of the machine. (Format: ***.***.***.***; Range for ***: 0 to 255)
Type in the subnet mask for the connected network. (Format: ***.***.***.***; Range for ***: 0 to
255)
Type in the default gateway for the connected network. (Format: ***.***.***.***; Range for ***: 0
to 255)
Select whether or not RAW ports are used.
If "RAW Port" was set to "ON", type in the RAW port number. (Range: 1 to 65535)
Select whether or not DNS is used.
If DNS is enabled, type in the host name.
Range: Up to 64 characters
Characters that can be entered: Alphanumeric characters and symbols (-)
If DNS is enabled, type in the domain name.
Range: Up to 64 characters
Characters that can be entered: Alphanumeric characters and symbols (- . @)
Type in the address of the DNS server. (Format: ***.***.***.***; Range for ***: 0 to 255)
Select the length of time until there is a timeout for the response from the DNS server.
Select whether or not SLP is used.
Select whether or not LPD is used.
, the machine must be restarted
3
3-46