Power Save Mode; Changing Mobile Setting - Konica Minolta bizhub 306/266 User Manual

7.1 Printer operation
[1st SIDE COVER OPEN]
[DUPLEX COVER OPEN]
[TONER EMPTY]
7.1.4

Power Save mode

If the machine receives print data while in the Power Save mode, the Power Save mode is released.
When the machine receives print data, it warms up then prints the data.
7.1.5

Changing mobile setting

1
Press the Utility key.
2
Use the +/, key to select [ADMIN. MANAGEMENT], and press the OK key.
3
Enter the administrator number using the Keypad, and press the OK key.
% The factory default of the administrator number is [000000].
4
Use the +/, key to select [MOBILE SETTING], and press the OK key.
5
Use the +/, key to select [MOBILE PRINT], and press the OK key.
6
Use the +/, key to select [DISABLE] or [ENABLE], and press the OK key.
The screen returns to the mobile setting screen.
Tips
- For details on how to prints, refer to the help of Mobile (for iPhone/iPad/Android).
- To perform secure printing, enter the password using four digits in the range between 0000 to 9999. If
a password using characters other than four-digit numeric, the print job is discarded and will not be
printed.
bizhub 306/266
7
7-5