Omron E5CN User Manual page 259

Advanced Function Setting Level
Control Output 1 ON/OFF Count Alarm
ra1
Set Value
Function
Monitor
See
See
Control Output 2 ON/OFF Count Alarm
ra2
Set Value
Function
Monitor
See
See
234
• An ON/OFF count alarm occurs when the ON/OFF counter exceeds the
value set for this parameter.
• It is possible to assign ON/OFF count alarms to auxiliary outputs and to
have them displayed on the screen.
• This function is disabled when the set value is 0.
Setting range
0 to 9999
■ Related Parameters
Control output 1 ON/OFF count monitor (advanced function setting level):
Page 233
• An ON/OFF count alarm occurs when the ON/OFF counter exceeds the
value set for this parameter.
• It is possible to assign ON/OFF count alarms to auxiliary outputs and to
have them displayed on the screen.
• This function is disabled when the set value is 0.
Setting range
0 to 9999
■ Related Parameters
Control output 2 ON/OFF count monitor (advanced function setting level):
Page 233
Control output 1 must be supported.
Relay or voltage outputs (for driving
SSR) must be used.
Unit
100 times
Control output 2 must be supported.
Relay or voltage outputs (for driving
SSR) must be used.
Unit
100 times
Section 5-8
Default
0
Default
0