Housing (Frame)/Panel Assy./Panel Board Removal - Epson R200 - Stylus Photo Color Inkjet Printer Service Manual

EPSON Stylus Photo R200/R210

2.3.2 Housing (frame)/Panel Assy./Panel Board removal

o
External View
Left front side
5
C.B.S 3x8 (5-7kgf/cm)
Backside
Cover, Ink Tube
3
2
4 4 4
Housing, Frame
C.B.P 2.5x8 (3-5kgf/cm)
Figure 2-4. Housing (frame) removal
o
Parts/Units which should be removed before removing Housing (frame)/
Panel assy./Panel board
Paper Support Assy./Housing (left/right)/Stacker Assy.
DISASSEMBLY AND ASSEMBLY
Right front side
1
5
Panel assy.
Panel FFC
CN4
o
Disassembly Procedure
n
Housing (frame) removal
1
1. Remove the screw (
mechanism.
2
2. Remove the screw (
(frame), and release the hook (
4
3. Release the hooks (
5
4. Release the hooks (
5. Remove the housing (frame) upward.
n
Panel assy. removal
1. Release two hooks for securing the panel assy. to the housing (frame).
n
Panel board removal
1. Remove the panel board upward.
o
When reinstalling the housing (frame),
n
You have to reeve the panel FFC to the hole of the housing
(frame) is inserted to the panel board before installing the
housing (frame).
n
Make sure to connect panel FFC to the main board (CN4)/
panel board before installing the housing (frame).
n
Make sure that there is no clearance beteen the housing
(frame) and the housing (lower).
Disassembly
, x1) for securing the housing (frame) to the printer
, x1) for securing the "Cover, Ink tube" to the housing
3
, x1) of the cover.
, x3) for securing the backside of the housing (frame).
, x2) for securing the front side of the housing (frame).
Panel board
Hole for reeving the panel FFC
Figure 2-5. Panel board installation
Revision A
39