Operator Settings; Setting The Operator Status - Nortel CallPilot 150 Administration Manual

92 Chapter 9 CallPilot operations

Operator settings

With the Operator settings you can:
• set the Operator status to On or Off
• change the Operator password
• reset the Operator password
• set the Business Status
• assign CallPilot Line answering
• change Automated Attendant Status

Setting the Operator status

Set the Operator status to Yes when your receptionist or operator is available to respond to callers.
Set the Operator status to No when your receptionist or designated operator goes for a break,
lunch, or leaves in the afternoon.
When the Operator Status is set to No, a caller who requests an Operator is informed the Operator
is not available, and is transferred to the Automated Attendant to dial another extension or leave a
message.
To set the Operator status
Pswd:
RETRY
Atdt avail: N
CHNG
P0919416 03
Press ≤·°¤.
1
Enter the default operator password fl‡‹‡¤°fl‡
2
OK
(Operator)
and press OK.
To change the Operator password, see
password" on page
3
Press CHNG to select Y or N.
NEXT
Press ® to end the session.
4
"Changing the Operator
93.