Changing A Mailbox - Nortel CallPilot 150 Administration Manual

32 Chapter 4 Working with mailboxes

Changing a mailbox

After you add a mailbox, you can change the mailbox:
• password
• extension
• Class of Service
• display name
• appearance in the Company Directory
• Message Waiting Notification
• outdial route
• Alternate extension
• Express Messaging Line
• Call Screening
Note: Reset a password only if the mailbox owner forgets it or is "locked-out". The
password for a reset mailbox is 0000. Mailbox owners cannot access their messages until
they change the default password. After you reset a mailbox password, tell the mailbox
owner to change the default password as soon as possible. While the mailbox has the
default password, the mailbox is vulnerable to unauthorized access.
To change a mailbox
Log:
QUIT RETRY
Admin
MBOX AA
Mailbox Admin
ADD DEL
Mbox:
DIR
Password
RESET
Password reset
Password
RESET
P0919416 03
≤
·°‹.
1 Press
OK
Enter the System Administrator mailbox number and password,
and then press OK.
2
Press MBOX.
OTHR
3 Press CHNG.
CHNG
4
Enter the mailbox number or press DIR to use the Company
QUIT
Directory.
5 If you want to change the password press RESET
NEXT
or
press NEXT to change other mailbox settings and go to step 8.
6
The password is reset.
7 Press NEXT to change other mailbox settings
NEXT
or
press ® to end the session.