Changing A Transfer Node - Nortel CallPilot 150 Administration Manual

82 Chapter 7 Working with CCR Trees
Tree saved
CCR Admin
ADMIN

Changing a Transfer node

To change a Transfer node
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRY
Tree: x
CHNG
Path:
RETRY END
x
CHNG ERASE
Ext: xx
CHNG
Transfer
EXT INT
Ext:
CHNG
Path:
RETRY END
Tree: x
SAVE
Save as tree x
YES OTHR
P0919416 03
16 This display appears briefly.
17 Press ® to end the session.
Press ≤·°‹.
1
OK
Enter the System Administrator Mailbox number and password,
and then press OK.
2
Press OTHR.
OTHR
3
Press CCR.
4
Press ADMIN.
5 Enter the number of the CCR Tree that you want to change and
OK
press OK.
6
Press CHNG.
QUIT
7 Enter the Path number of the node you want to change and press OK.
OK
Xfer 8
Press CHNG.
OK
9
Press CHNG.
NEXT
10 Press INT if you are changing an internal extension
or
press EXT if you are changing an external extension.
11 Enter the new extension number you want to transfer to and press
NEXT
NEXT.
12 Press END.
OK
13 Press SAVE.
QUIT
14 Press YES.
QUIT