Nortel CallPilot 150 Administration Manual page 120

120 Chapter 11 Troubleshooting CallPilot
Message
Not allowed
Not recorded
Options cancel
Out of space
Party not avail
Pswd too long
Rec too long
Rec too short
Speak up
Not enabled
P0919416 03
Meaning
Appears if:
• a subscriber is not allowed access to a feature or Feature Code
• a subscriber tries to access the Configuration or Operator Status feature
codes
• the message recorded has too many Forwards and Replies
• a recorded message reaches its maximum number of segments. This is
caused by repeatedly using "pause" and "continue" while recording a
message
• a Group List number is entered as a mailbox member of another Group List. A
Group List number cannot be added to a Group List.
Appears if you try to play a Primary or Alternate Greeting before it is recorded.
Appears if you cancel Delivery Options while you are sending a message.
Appears if the CallPilot Message Storage capacity is full. You must delete old
messages from the General Delivery Mailbox and tell subscribers to delete any
unnecessarily stored messages from their mailboxes.
Appears if a subscriber tries to use the Reply feature to reply to an external call,
but there is no Caller ID (CLID) contained in the message left by an external
caller.
Appears if a password exceeds eight digits. A password must be between four
and eight digits long.
Appears if a recorded message is too long. Message or greeting length for a
mailbox is determined by the Class of Service.
Appears if a recorded message is too short.
Appears if you record a greeting or message and do not meet the minimum
volume level. Do not use Handsfree. Speak directly into the handset of your
telephone.
Appears if Group Lists are not enabled.