Adding A Menu Node - Nortel CallPilot 150 Administration Manual

66 Chapter 7 Working with CCR Trees

Adding a Menu node

Create a Menu node to organize choices for your callers, or when you have more choices than can
fit on one menu. You can add a menu node to a CCR Tree at any time.
To add a Menu node
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRY
Tree enabled
Tree: x
CHNG
Path:
RETRY END
x
MENU INFO
Primary prompt
REC
Rec pri prompt:
RETRY
Accept prompt?
RETRY PLAY
Rec alt prompt?
YES NO
P0919416 03
Press ≤·°‹.
1
OK
Enter the System Administrator Mailbox number and password,
and then press OK.
2
Press OTHR.
OTHR
3 Press CCR.
4
Press ADMIN.
5 Enter the number of the CCR Tree you want to add a Menu node to
OK
and press OK.
6 If you have assigned the CCR Tree to a Greeting Table this display
appears briefly.
7
Press CHNG,
QUIT
8
Enter the Path number and press OK.
OK
For example, to create a Menu node on the second level of the CCR
Tree, enter ⁄⁄. The first 1 is the path of the first level Menu
node. The second digit is the path where you want to create the new
Menu node.
9 Press MENU.
OTHR
10 Pick up the handset and press REC.
At the tone, record the prompt.
11 Press OK to end the recording. Do not hang up the handset.
OK
12 Press OK to accept the recording
OK
or
if you want to re-record your message, press RETRY.
13 Press NO if you do not want to record an alternate prompt
or
press YES to record an alternate prompt.