Nortel CallPilot 150 Administration Manual page 55

To route a phone number
Log:
QUIT RETRY OK
Admin
MBOX AA OTHR
Call id table
ADD CHNG QUIT
Ph:
RETRY OK
Destination
TABLE EXT OTHR
Call id table
ADD CHNG QUIT
Chapter 5 Setting up the Automated Attendant
Press ≤·°‹.
1
Enter the System Administrator Mailbox number and password,
and then press OK.
Enter ⁄⁄.
2
3
Press ADD.
4 Enter the phone number or the leading digits of a phone number
(up to 13 digits) and press OK.
Each phone number assigned to the CLID Routing Table must be
unique.
5
Choose a destination.
To route the phone number to a Greeting Table:
• Press TABLE
• Enter a Greeting Table number from 1 to 4
• Press OK
To route the phone number to an extension:
• Press EXT
• Enter the extension number
• Press OK
To route the phone number to a mailbox:
• Press OTHR
• Press MBOX
• Enter the mailbox number
• Press OK
To route the phone number to a CCR Tree:
• Press OTHR
• Press CCR
• Enter the CCR Tree number from 1 to 8
• Press OK
6 Repeat steps 3 through 5 for each phone number you want to route.
Press ® to end the session.
7
CallPilot 150 Telephone Administration Guide
55