Changing A Mailbox Node - Nortel CallPilot 150 Administration Manual

80 Chapter 7 Working with CCR Trees

Changing a Mailbox node

To change a Mailbox node
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRY
Tree: x
CHNG
Path:
RETRY END
x
CHNG ERASE
Mbox: xx
CHNG
Mbox:
DIR
Dest: <xxxx>
CHNG
Path:
RETRY END
Tree: x
SAVE PRINT
Save as tree x
YES OTHR
Tree saved
CCR Admin
ADMIN
P0919416 03
Press ≤·°‹.
1
OK
Enter the System Administrator Mailbox number and password,
and then press OK.
2 Press OTHR.
OTHR
3
Press CCR.
4
Press ADMIN.
5 Enter the number of the CCR Tree that you want to change and press
OK
OK.
6
Press CHNG.
QUIT
7
Enter the Path of the node you want to change and press OK.
OK
LvMsg 8
Press CHNG.
OK
9
Press CHNG.
NEXT
10 Enter the new mailbox number.
QUIT
Make sure the mailbox is initialized before you assign it to a CCR
Tree.
11 Press OK if you want to accept the assigned destination type
OK
or
press CHNG and assign a new destination type.
12 Press END.
OK
13 Press SAVE.
QUIT
14 Press YES.
QUIT
15 This display appears briefly.
16 Press ® to end the session.