Working With Mailboxes; Adding A Subscriber Mailbox - Nortel CallPilot 150 Administration Manual

Chapter 4

Working with mailboxes

Adding a Subscriber mailbox

Assign all Subscriber mailboxes mailbox numbers that begin with the same digit. This helps you to
identify the mailbox type. If the system times out before you enter all the values for a mailbox, use
the procedures in
To add a Subscriber mailbox
Log:
QUIT RETRY
Admin
MBOX AA
Mailbox Admin
ADD DEL
Mbox:
RETRY
Type:subscriber
NEXT
Ext:
RETRY
Service class:
RETRY
Name:
RETRY BKSP
Directory?
YES NO
Msg waiting?
YES NO
Outdial: <none>
CHNG
"Changing a mailbox" on page 32
Press ≤·°‹.
1
OK
Enter the System Administrator Mailbox number and password,
and then press OK.
2
Press MBOX.
OTHR
3 Press ADD.
CHNG
4
Enter the mailbox number.
QUIT
5 Press OK.
OK
6
Enter the extension number.
OK
7 Enter a Class of Service from 1 to 16.
OK
Enter the mailbox owner's last name, press ££, enter the mailbox
8
OK
owner's first name or initial, and then press OK.
The name can be a maximum of 16 characters.
For information on entering names using the telephone dialpad,
refer to "Using the dialpad" on page
9 Press YES if you want the Subscriber's name to be included in the
Company Directory.
10 Press YES if you want the Subscriber to have Message Waiting
Notification.
11 Press NEXT if you do not want to assign outdialing and go to step 15
NEXT
or
press CHNG.
to finish setting up the mailbox.
12.
CallPilot 150 Telephone Administration Guide
25