Fujitsu PRIMERGY RX300 S6 Options Manual page 77

Figure 53: Routing the USB cable and power supply cable through the fan box holder and air
duct holder
Ê Route the cables in the fan box holder and air duct holder as shown in the
photograph.
Ê Replace the fan box (see
Ê Close the server, connect it to the power outlet, and switch it on as described
in the section "Closing the server" on page
RX300 S6
USB tape drive/USB RDX drive
section "Installing a fan box" on page
Options Guide
119.
115).
77