Installing A Second Processor - Fujitsu PRIMERGY RX300 S6 Options Manual

Installing a second processor

6.1 Installing a second processor
The system board can be upgraded with a second processor. The upgrade kit
consists of a processor and a heat sink.
V
CAUTION!
Only identic processors may be used on the system board. Both
processors must have the same clock frequency and the same cache.
For dual operation, use a suitable multiprocessor operating system.
I
Install the heat sink as described in the sections
on page 47
Ê Open the server as described in
Ê Lift the air duct over the main memory up and off (see
duct" on page
Figure 12: Opening the processor cover
Ê Push the two heat sink retention levers in, unlock them, and swing them
open.
Ê Open the socket release lever and swing it up as far as possible.
42
and "Replacing the heat sink" on page
30).
Options Guide
chapter "Preparation" on page
RX
"Installing the heat sink"
52.
27.
"Removing the air
300 S6