Fujitsu PRIMERGY RX300 S6 Options Manual page 74

USB tape drive/USB RDX drive
Installing a USB RDX drive
Figure 49: Pushing the power supply and USB cable frontward through the bay
Ê Push the power supply cable frontward through the bay.
Ê Push the USB cable frontward through the bay. The black plug must be on
the outside.
Figure 50: Connecting a USB RDX drive
Ê Connect the power supply cable to the RDX drive.
Ê Connect the USB cable to the RDX drive.
Ê Push the drive in.
I
Make sure that the locking levers at both sides (see circles in
figure 45) are engaged. Press the locking levers outward.
74 Options Guide
RX 300 S6