Accessible Drives And Lsp/Lsd - Fujitsu PRIMERGY RX300 S6 Options Manual

7

Accessible drives and LSP/LSD

V
CAUTION!
Before installing/removing an accessible drive to/from the s erver, turn
off the server, all peripheral devices, and any other connected
devices. Also unplug all power cords from the power outlet. Failure to
do so can cause electric shock.
When installing an accessible drive, hold it by the side. Applying force
to the top may cause failures.
Do not touch the circuitry on boards and soldered parts. Hold the
metallic areas or the edge of the circuit boards.
The circuit boards and soldered parts of internal options are exposed
and can be damaged by static electricity. Before handling them, first
touch a metal part on the server to discharge static electricity from
your body.
Before installing an internal accessible drive, see the manual for the
accessible drive.
When forcing an accessible drive into a server, be careful so as not
to pinch the cable etc. connected to an accessible drive.
Follow the safety instructions in the
page 19.
I
There are two free slots available for accessible drives. 5.25-inch x 0.5-
inch slot for an optical drive and one bay for a USB magnetic tape drive
or USB RDX drive.
RX300 S6
chapter "Safety instructions" on
Options Guide 55