Figure 91: Securing a TPM Module
Ê Fasten the TPM with the special screw for the TPM.
Please use the TPM screwdriver insert bit to tighten the special screw.
I
Do not fasten the screw too tightly (torque value of 0.6 Nm).
Ê Reinstall the air duct (see
Ê Insert the power supply cage as in
on page
116.
Ê Close the server (see
the rack (see
section "Installing the server in the rack" on page
it to the power outlet, and switch it on, as described.
RX300 S6
section "Inserting the air duct" on page
section "Installing a power supply cage"
section "Closing the server" on page
Options Guide
TPM
118).
119), insert it into
120), connect
111