Fujitsu PRIMERGY RX300 S6 Options Manual page 71

Figure 45: Installing a USB tape drive
Ê Push the drive in.
I
Make sure that the locking levers at both sides (see circles) are
engaged. Press the locking levers outward.
Ê When pushing in the drive, pull the cables back carefully to ensure that they
do not become trapped.
Figure 46: Routing the cable
Ê First route the cables to the right (see photograph) and then up, to ensure
that the cables do not become trapped between the backplane and the USB
drive module. Check the cable routing through the slit in the backplane.
RX300 S6
USB tape drive/USB RDX drive
Options Guide 71