Fujitsu PRIMERGY RX300 S6 Options Manual page 113

Figure 93: Connecting the UFM to the system board
Ê Connect the USB Flash Module to the system board. The spacer must click
into the hole on the system board.
Ê Insert the power supply cage as in
on page 116.
Ê Reinstall the air duct (see
Ê Close the server (see
the rack (see section "Installing the server in the rack" on page
it to the power outlet, and switch it on, as described.
RX300 S6
section "Installing a power supply cage"
section "Inserting the air duct" on page
section "Closing the server" on page
Options Guide
USB Flash Module (UFM)
119), insert it into
120), connect
118).
113