Tpm - Fujitsu PRIMERGY RX300 S6 Options Manual

Ê Connect the front VGA cable to the system board. See cabling plan
"Appendix" on page
Ê Replace the fan box (see
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page
9.3

TPM

Figure 88: TPM installation kit
1 TPM (Trusted Platform Module)
2 TPM spacer (Server)
3 TPM spacer (Server Blade)
Ê Open the server as described in
Ê Remove the air duct as described in
page 30.
Ê Remove the power supply cage as described in
power supply cage" on page
RX300 S6
123.
section "Installing a fan box" on page
115.
4
5
section "Opening the server" on page
section "Removing the air duct" on
32.
Options Guide
Special screw for TPM
TPM screwdriver insert bit for
TPM special screw
section "Removing the
TPM
chapter
115).
29.
109