Installing expansion cards
8.1
Installing expansion cards
I
The system board offers seven low profile PCI slots:
There are no hot-plug slots.
In the standard setup, slot 1 is populated with a SAS/SATA RAID
controller.
You will find an overview of the slots in the technical manual for the
system board D2619-N.
Ê Open the server as described in
Figure 66: Removing the slot cover
Ê Remove the screw from the slot cover of the slot you want to equip.
Ê Remove the slot cover.
V
CAUTION!
Keep the slot cover of the PCI slot. If you remove the controller again
and do not repl a ce it with a new one, the slot cover must be reinstalled
to comply with EMC regulations and to satisfy cooling requirements
and fire protection measures.
90
chapter "Preparation" on page
Options Guide
RX
27.
300 S6