Fujitsu PRIMERGY RX300 S6 Options Manual page 94

Upgrading a SAS/SATA RAID controller
Figure 70: Installing a controller
Ê Insert the SAS/SATA RAID controller into PCI slot 1 (1) and push it carefully
to secure.
Ê Secure the slot cover (2) with a screw.
Ê Connect plug X1 to the upper slot and plug X2 to the lower slot of the
controller (3).
Ê Close the server, connect it to the power outlet, and s witch it on as described
in the chapter "Completion" on page
94
115.
Options Guide
RX 300 S6