Kodak Scan Station 700 Administrator's Manual page 96

9-12
Uploading firmware
1. Select the Scan Station(s) where you want to send new firmware.
NOTE: To select more than one Scan Station, use the Ctrl or Shift
key and click the mouse button. The selected Scan Stations
will be highlighted.
2. Select Scanner>Upload Firmware. The Open dialog box will be
displayed.
3. Select the file that you want to upload and click Open.
NOTES:
• Only a KSSUpdate.exe file can be uploaded to the Scan Station.
• The message, Uploading, Please wait will be displayed while
the file is being uploaded.
• If the Scan Station firmware and the KSSUpdate firmware are at
the same revision level, no action will be taken.
• You can "roll-back" to an older version or update to a newer
version of the Scan Station firmware. If an older version of the
KSSUpdate.exe file is uploaded, the Scan Station will be rolled
back to use the older version of the firmware. If a newer version is
uploaded, the Scan Station will be updated with this newer
firmware.
• You can obtain update packages from your Service
Representative. Update packages will always be a file called
KSSUpdate.exe.
A-61796 December 2013