Kodak Scan Station 700 Administrator's Manual page 33

Configuring email
settings
4-8
For the Scan Station to send documents to email recipients, you must
define how the Scan Station will access your email server.
1. Check Email Server and click Next.
2. Enter an IP address or a fully qualified domain name of your SMTP
server in the Email Server Address field.
3. If your SMTP server requires it, enter a Username, Password and
an optional Domain name for the email server account that the
Scan Station will log into.
4. Most email servers communicate on port 25. If your email server
communicates on a different port, select the desired port number.
5. Select Authentication Scheme to select the specific SMTP
Authentication Scheme used by your email server. Select from the
following options:
• Use Strongest
• None
• Plain
• Login
• MD5 Challenge Response
• NTLM
NOTE: Use Strongest will select the strongest available
authentication scheme reported by the email server. For
more information on authentication schemes, consult your
network administrator.
6. Use the up and down arrows to select the desired Maximum
Attachment Size of an email attachment that can be sent
successfully (1 to 99 MB in 1 MB increments).
A-61796 December 2013