Kodak Scan Station 700 Administrator's Manual page 32

A-61796 December 2013
Date — allows you to set the date format on the Scan Station.
1. From the Date Separator drop-down list, select a symbol to use as a
separator in the date format.
2. Select how you want the date displayed on the Scan Station
touchscreen by selecting a format (year, month, day) from the Date
Format drop-down list.
Time — allows you to set the time format on the Scan Station.
1. Select the desired Time Zone.
2. If you want the Scan Station to automatically adjust for daylight
savings time, check the Daylight Savings check box.
3. Select either 12 Hour or 24 Hour time format from the Clock drop-
down list.
4. Select the desired separator symbol that will be displayed in the
time format from the Time Separator drop-down list.
5. Select the hours, minutes, seconds of how you want the time format
to be displayed: hh:mm:ss, h:mm:ss, hh:mm or h:mm.
Power Saver (for Scan Station 700 only) — use the up and down
arrows to set the amount of time the Scan Station needs to be inactive
before it goes into power saver mode. The default is 15 minutes.
Depending on the options you selected on the main Device Settings
screen, you will have the option of clicking Next which will display the
next device you want to configure, or Finish which will return you to the
Configuration tab.
4-7