Kodak Scan Station 700 Administrator's Manual page 68

6-16
• If you select SFTP the following options are available:
- If the SFTP site communicates on a port other than Port 22,
change the value using the up and down arrows. When you
select SFTP, the port value will automatically change to the
default value of Port 22.
- A Private Key file is an encrypted key that is used to access
the SFTP server. There are several different types of Private
Key files. Use the Browse button to select the Private Key
file stored on your computer or network. Consult the SFTP
administrator for the appropriate Private Key file to use.
NOTE: Private Key files encrypted with DSA 2048, 4096 bits
and Putty SSH1 RSA are not supported.
- If you entered a Private Key file and the file is password
protected, you must enter a password. The password is used
to decrypt the Private Key file.
Click the Proxy down arrow to configure the proxy settings. SFTP
supports two proxy types: HTTP and SOCKS.
HTTP
- If you select HTTP as your Proxy Type, enter the Proxy
Address in the form of a fully qualified domain name (e.g.,
FTP.acme.com) or as an IP address.
- Enter the Username and Password required to access the
proxy server.
- If the proxy server is configured to communicate on a port
other than Port 81, change the value using the up and down
arrows.
- Select the appropriate Authentication Type for the proxy
server. If you do not know if you should use LOGIN or NTLM,
consult your administrator.
SOCKS
- If you select SOCKS as your Proxy Type, enter the Proxy
Address in the form of a fully qualified domain name (e.g.,
FTP.acme.com) or as an IP address.
- Enter the Username and Password required to access the
proxy server.
- If the proxy server is configured to communicate on a port
other than Port 1080, change the value using the up and
down arrows.
- Select the appropriate Version for the proxy server. If you do
not know if you should use SOCKS4 or SOCKS5, consult
your administrator.
A-61796 December 2013