Kodak Scan Station 700 Administrator's Manual page 36

A-61796 December 2013
6. Enter the Active Directory Server Fax Field Tag for the tag to use
when searching the Active Directory Server for fax numbers. For
more information, contact your network administrator for the exact
string to use (e.g., facsimiletelephonenumber).
7. Select the maximum number of records to display when performing
a search from the Search Results To Return field. Select a number
from 1 to 1000.
NOTE: You may need to use the scroll bar to access the Security
Type, Force User Login and the Test Connection options.
8. Select the Security Type to setup a secure connection to your
Active Directory Server. Selections are: None, SSL or TLS.
• If you select SSL or TLS, the Certificate and Certificate
Password fields will be displayed allowing you to select a
certificate file.
• Some certificates require a password. If your certificate requires
a password, enter the password.
9. If you check Force User Login, it requires the user to login before
beginning a scan session. At login, the user will have to enter a user
name, password and domain.
NOTE: A default administrator account is available for logging onto
the Scan Station after enabling Force User Login. Initially
the password will be "blank" and it is up to you to set this
password to prevent user access to administrative
functions. For information on this password, see the section
entitled, "Configuring your device options" earlier in this
chapter.
10. Click Test Connection if you want to check to be sure your settings
are correct. When finished, a Success or Failure message will be
displayed. If the test connection failed, verify that all of your settings
are correct and make any necessary changes, until a Success
message is displayed.
Depending on the options you selected on the main Device Settings
screen, you will have the option of clicking Next which will display the
next option you want to configure, or Finish which will return you to the
Configuration tab.
4-11