Kodak Scan Station 700 Administrator's Manual page 63

A-61796 December 2013
5. Enter any text that describes the printer in the Description field.
• If you want to connect to a print server on a network domain or to
a printer that is shared by another computer on a network,
continue with Step 6.
• If you want to connect to a network printer that is directly
connected to the network via an Ethernet cable plugged directly
into a router or hub, click the Printer Driver Settings down arrow
and continue with Step 11.
6. Enter the fully qualified path to the printer server and print queue
(e.g., \\printservername\printqueue) in the Enter a complete
directory path field.
7. If the network domain is configured to require authentication to
install a printer driver, enter the Username, Password, and
Domain names.
NOTE: If proper authentication is not provided, the printer and its
driver may not be installed on the Scan Station.
8. Click Finish.The following screen will be displayed showing the
printer destination and group.
9. If you want to add more printer destinations within the same printer
destination group, select the Add icon and repeat Steps 5 - 8.
10. To add another printer destination group, select the printer
destination type and then click the Add icon, otherwise click Finish.
6-11