Kodak Scan Station 700 Administrator's Manual page 82

A-61796 December 2013
6. Select the Scan Settings you want to use for this job and click Next.
The following screen will be displayed.
NOTE: You can also create new scan settings from this screen by
clicking the Add icon.
7. Select the destination(s) where want this job to be sent:
• You can select entire destination groups by clicking the highest
level checkbox for the group.
• You can select individual destinations by clicking on the
destination(s) that is displayed below the group name.
• If you want to create another destination on-the-fly, click the Add
icon. The Destinations screen will be displayed allowing you to
add another destination. For procedures on adding destinations
see Chapter 6, Creating Destinations.
8-3