Kodak Scan Station 700 Administrator's Manual page 65

A-61796 December 2013
15. On the Ports tab, write down the exact text that appears on the
selected Port value.
NOTE: As shown below, this would be "IP_192.168.2.137".
16. Return to the Kodak Scan Station 700/720EX - Scanner
Administration application and enter the fully qualified address of
the PC sharing the printer including the share name (e.g.,
\\workgrouppc\BrotherH) in the Address field.
17. With the information from Steps 14 and 15, enter the driver name
and the port name in their respective fields.
18. If you want to add more printer destinations within the same printer
destination group, select the Add icon and repeat this procedure
starting with Step 5.
19. To add another printer destination group, select the printer
destination type and then click the Add icon, otherwise click Finish.
The printer driver will be installed from the sharing PC. A connection
will be made between the printer and the Scan Station using the IP
address entered. After the initial installation, the shared printer
connection is no longer required and the Scan Station will be able to
communicate directly with the network printer.
NOTE: If a printer fails to install, check the logfile for the error code.
Search for the error code on the Microsoft website.
6-13