Kodak Scan Station 700 Administrator's Manual page 29

4-4
Network Destination Credentials — when selected, define the
Username, Password and Domain required to access network
resources.
1. Enter the network user name assigned to the Scan Station. For
more information see the section entitled, "Network configuration
details" in Chapter 2.
NOTE: If you want the Scan Station to have access to network
printers or network shared folders, the credentials provided
must have sufficient privileges to access these resources.
2. Enter the password for the network user name in the Password
field.
NOTE: This password is only used by the Scan Station and will
never be displayed in readable form. The password is
stored in encrypted format.
3. Enter the Microsoft network domain name which the Scan Station
will be connected to in the Domain field. In a workgroup
environment, this field can be left blank.
Remote Configuration Settings — the Scan Station can be
configured to look for an updated configuration on specific days and
times. Select this option to allow your Scan Station to automatically look
for an updated configuration.
1. Enter a network folder where the Scan Station will find updated
configuration settings.
2. Select which day(s) of the week this operation will be performed.
3. Select the time of day you want your Scan Station to check for
updates.
NOTE: When updating a configuration using this method, the fields
on the Add Scanner/Modify Scanner dialog box will not be
updated: Device Name, IP Address and Device Password.
A-61796 December 2013