Rep 8.4 Ela Hou - Mp Assembly - Xerox WorkCentre M20 Service Manual

REP 8.4 ELA HOU - MP Assembly

Parts List on PL 4.25 and PL 8.20
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the ELA HOU - frame main assembly, REP 4.4.
2. Disconnect CN27 and CN31, Figure 1.
Figure 1 Connectors
3. Remove the PMO - cover feed, Figure 2.
Work Centre M20 Family
1
Disconnect CN27 and
CN31.
4. Prepare to remove the ELA HOU - MP assembly, Figure 3.
5. Remove the ELA HOU - MP assembly, Figure 4.
March 2004
4-25
1
Remove 1 screw, then
the PMO - cover feed.
Figure 2 PMO - cover feed removal
Figure 3 Preparation
Repairs and Adjustments
1
Remove 3 screws.
REP 8.4