Rep 8.4 Ela Hou - Mp Assembly - Xerox WorkCentre M20 Service Manual

REP 8.4 ELA HOU - MP Assembly

Parts List on PL 4.25 and PL 8.20
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the ELA HOU - frame main assembly, REP 4.4.
2. (M20F) Disconnect CN27 and CN31 from the PBA main, Figure 1.
(4118) Disconnect CN8 from the HVPS and CN19 from the PBA main, Figure 1.
(2218) Disconnect CN8 from the HVPS and CN22 from the PBA main, Figure 1.
Figure 1 Connectors
WorkCentre M20, 4118, FaxCentre 2218 Family
3. Remove the PMO - cover feed, Figure 2.
1
Disconnect 2
4. Prepare to remove the ELA HOU - MP assembly, Figure 3.
connectors.
December 2006
4-43
1
Remove 1 screw, then
the PMO - cover feed.
Figure 2 PMO - cover feed removal
Figure 3 Preparation
Repairs and Adjustments
1
Remove 3 screws.
REP 8.4