Xerox WorkCentre M20 Service Manual page 88

1
Disconnect CN5 and 1 ground
harness.
Figure 8 MEA unit - cover open removal
11. Remove the MEA unit guide duplex, Figure 9.
Figure 9 MEA unit guide duplex removal
12. Remove the MEA unit support pick up assembly, Figure 10.
Repairs and Adjustments
REP 5.1
2
Open the MEA unit - cover
open
3
Align the flat on the rear pivot with
the slot in the frame. Remove the
MEA unit - cover open from the rear
pivot, then the front pivot.
1
Remove the MEA unit
guide duplex.
March 2004
4-16
1
Remove 2 screws.
Figure 10 MEA unit support pick up assembly removal
13. Remove the MEA unit - pickup, Figure 11.
2
Remove the MEA unit support pick
up assembly. Then disconnect the
spring.
Work Centre M20 Family