Pl 8.10 Side Cover Assembly (1 Of 2) - Xerox WorkCentre M20 Service Manual

PL 8.10 Side Cover Assembly (1 of 2)

Item Part Description
1 – ELA HOU - Side Cover Assembly
(Not Spared)
2 022N02057 MEA Unit - Duplex Assembly (REP
8.2)
3 – Ring - CS (REF: PL 31.10 Item 6)
4 – Gear - Dup Idler 17 (see NOTE 2)
5 – Gear - MP/DUP DRV (see NOTE 2)
6 – Spring Feed (see NOTE 2)
7 – PMO - Bushing Feed (see NOTE 2)
8 – PMO - Bushing TX(B4) (see NOTE
2)
9 – PMO - Shaft DUP Driver (see
NOTE 2)
10 – RPR - Rubber Exit (see NOTE 2)
11 – IPR - BRKT G DUP (see NOTE 2)
12 – PMO - Roller Exit (see NOTE 2)
13 – Spring Fuser Exit (see NOTE 2)
14 – PMO - GP Lower DP (see NOTE 2)
15 – PMO - Feed Frame (see NOTE 2)
16 – IPR - Bracket Guide B (see NOTE
2)
17 – CBF Harness - OPE GND (see
NOTE 2)
18 – IPR - BRKT Ground B (see NOTE
2)
19 – IPR - BRKT Ground A (see NOTE
2)
20 – IPR - BRKT Ground TR (see NOTE
2)
21 – PMO - Holder Saw (see NOTE 2)
22 – IPR - Plate saw (see NOTE 2)
23 – IPR - BRKT Guide A (see NOTE 2)
24 009N01363 MEA Unit - Hold Gear
25 – PMO - Bush (P/O PL 8.10 Item 24)
26 – Spring ETC - TRR (P/O PL 8.10
Item 24)
27 – PMO - Holder Gear TR (P/O PL
8.10 Item 24)
28 – MEA Unit - Hold TR GND (Not
Spared)
29 – PMO - Bush (P/O PL 8.10 Item 28)
30 – Spring ECT - TR (P/O PL 8.10 Item
28)
31 – Spring ETC - Plate TR (P/O PL
8.10 Item 28)
32 – PMO - Holder GND TR (P/O PL
8.10 Item 28)
33 022N01475 Transfer Roller
34 007N01114 Gear Transfer
NOTE: 1. If necessary, refer to GP 20 for the acronym list
and cross reference lists of more commonly recognised part
names.
NOTE: 2. Part of PL 8.10 Item 2.
Work Centre M20 Family
March 2004
5-19
Parts List
PL 8.10