Rep 4.3 Pmo Cover Exit Rear - Xerox WorkCentre M20 Service Manual

Figure 2 MEA unit - rear cover removal
Replacement
Replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 4.2, REP 4.3

REP 4.3 PMO Cover Exit Rear

Parts List on PL 4.25
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1
1. Remove the SMPS + HVPS, REP 1.1.
Remove the MEA
unit - rear cover.
2. Remove the PMO - connect paper MFP, Figure 1.
1
Remove the thumbscrew,
then the PMO - connect
paper MFP.
3. Remove the PMO cover exit rear, Figure 2.
March 2004
4-10
WARNING
WARNING
CAUTION
Figure 1 PMO - connect paper MFP removal
Work Centre M20 Family