Rep 8.1 Ela Hou - Side Cover Assembly - Xerox WorkCentre M20 Service Manual

REP 8.1 ELA HOU - Side Cover Assembly

Parts List on PL 8.10
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Prepare to remove the ELA HOU - side cover assembly, Figure 1.
2
Disengage both PMO - tie
stoppers.
Figure 1 Preparation
2. Fully open the ELA HOU side cover assembly. Remove the ELA HOU - side cover
assembly, Figure 2.
Work Centre M20 Family
1
Disengage the front
hinge.
Replacement
Replacement is the reverse of the removal procedure.
1
Remove 2 screws.
March 2004
4-23
3
Remove the ELA HOU - side
cover assembly.
Figure 2 ELA HOU - side cover removal
Repairs and Adjustments
2
Disengage the rear
hinge.
REP 8.1