Xerox WorkCentre M20 Service Manual page 108

1
Unhook both sides of the
ELA HOU scan upper
assembly.
Figure 9 ELA HOU scan upper assembly removal
12. Remove the A/S material dummy upper assembly, Figure 10.
Repairs and Adjustments
REP 14.1
2
Remove the ELA HOU
scan upper assembly.
2
Lift the left hand side of the A/S
material dummy upper assem-
bly, then slide it to the left to
remove.
13. Remove the IPR - channel base frame, Figure 11.
14. Remove the PMO - cover dummy lower, Figure 12.
March 2004
4-36
Figure 10 A/S material dummy upper assembly removal
Figure 11 IPR - channel base frame removal
1
Remove 2 screws.
1
Remove 4 screws, then
the IPR - channel base
frame.
Work Centre M20 Family