Xerox WorkCentre M24 Quick Start Manual

Smtp server verification

Hide thumbs Also See for WorkCentre M24:

Download this manual

Note 1: This is a suggested testing procedure that

requires a working knowledge of DOS, and a program

called "Telnet .exe" or "Telnet.com".

Note 2: If the echo function of your telnet program is

not enabled, you will not see what you type at the DOS

command prompt. Please type slowly and carefully.

Fig. 4-1

Open a DOS Command Prompt window.

Fig. 4-2

At the Command prompt on the DOS screen type: "telnet" the

of the SMTP server with port number "25". Then press

address

Enter. The entry should display as in Fig. 4-2.

Fig. 4-3

If you received a

Connect

failed, repeat step Fig. 4-2 again. If it con-

tinues to fail, please contact your IT Administrator or your Internet

Service Provider to obtain a working SMTP Server Address.

SMTP Server Verification - 1 of 2

Fig. 4-4

If you received the

ready

message similar to that in Fig. 4-4, continue

to the next step.

Fig. 4-5

Type in

"mail from: your e-mail

entry should look something like Fig. 4-5.

address" and press Enter. The

Page 1 Note 1: This is a suggested testing procedure that requires a working knowledge of DOS, and a program called “Telnet .exe” or “Telnet.com”. Note 2: If the echo function of your telnet program is not enabled, you will not see what you type at the DOS command prompt.
Page 2 Quick Start Guide SMTP Server Verification Fig. 4-6 Type in “rcpt to: your e-mail address” and then press Enter. The entry should look something like Fig. 4-6. The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page Fig.