Rep 4.1 Ela Hou - Drive Assembly - Xerox WorkCentre M20 Service Manual

REP 4.1 ELA HOU - Drive Assembly

Parts List on PL 4.20
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the MEA unit - rear cover, REP 4.2.
2. Prepare to remove the ELA HOU - drive assembly, Figure 1.
Figure 1 Preparation
3. Remove the ELA HOU - duct fan, Figure 2.
Repairs and Adjustments
REP 4.1
1
Disconnect CN15
and CN16.
4. Remove the ELA HOU - drive assembly, Figure 3.
March 2004
4-8
3
Remove 1 screw, then the
ELA HOU - duct fan.
Figure 2 ELA HOU - duct fan removal
1
Remove 4 screws and
disconnect 2 ground har-
nesses.
Figure 3 ELA HOU - drive assembly removal
1
Disconnect CN13.
2
Release the harness.
2
Remove the ELA HOU -
drive assembly.
Work Centre M20 Family