Rep 6.1 Unit - Lsu - Xerox WorkCentre M20 Service Manual

• The MEC clutch small (feed) connects to the black wires.
• The MEC clutch small (registration) connects to the green wires.
• The MEC clutch small (duplex) connects to the yellow wires.
• The ELA HOU - cover open switch connects to the red wires.
2. Ensure the 2 ground harnesses are installed onto the cover P - gear and the 3 ground
harnesses onto the guide - M scan assembly.
Repairs and Adjustments
REP 5.1, REP 6.1

REP 6.1 Unit - LSU

Parts List on PL 6.10
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Avoid exposure to laser beam. Invisible laser radiation.
Before performing this procedure, refer to General Disassembly Precautions, GP 10.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. Remove the MEA unit - cover PA exit assembly, REP 10.3.
2. Prepare to remove the unit - LSU, Figure 1.
March 2004
4-20
WARNING
WARNING
WARNING
CAUTION
Work Centre M20 Family