Xerox WorkCentre M20 Service Manual page 79

6. If installed, remove the cover E-mail, Figure 5.
Figure 5 Cover E-mail removal
7. Remove PBA SUB E-mail, Figure 6.
Figure 6 PBA SUB E-mail removal
Work Centre M20 Family
1
Remove the cover E-mail by gently
squeezing together the locking tabs
located on the underside of the
assembly.
1
Remove 5 screws, then the
PBA SUB E-mail.
March 2004
4-7
8. Remove the key plate, Figure 7.
1
Remove key plate.
Figure 7 Key plate removal
9. Remove the E-mail key pad, Figure 8.
1
Remove E-mail key pad.
Figure 8 E-mail key pad removal
Replacement
Replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 2.1