Table of Contents
Advertisement
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
Port Utilization
The Port Utilization window displays the percentage of the total available bandwidth being used on the port.
To view this window, click Monitoring > Port Utilization as shown below:
To select a port to view these statistics for, select the port by using the Port pull-down menu. The user may also use
the real-time graphic of the switch at the top of the web page by simply clicking on a port.
Change the view parameters as follows:
Parameter
Port
Time Interval
Record Number
Show/Hide
Figure 167. Port Utilization menu
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the switch will be polled between 20 and 200. The default value
is 200.
Check whether or not to display Port Util.
138
Hide quick links:
Advertisement
Table of Contents
