Default; Resetting The System To Factory Default Settings - Lorex LNR300 Instruction Manual

7 Click on the firmware file and click Upgrade.
8 Click Yes to confirm.
9 Wait for the firmware upgrade to complete. Do not disconnect the power or remove the USB
flash drive during the firmware upgrade. The NVR will reboot once the firmware upgrade is
completed.

Default

Resetting the System to Factory Default Settings

Restoring to factory default settings reverts any setting changes you have made to their
original settings. This does not affect the recordings saved on the NVR.
To reset to factory default settings:
1 Right-click and then click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Default then click OK. The system will reboot and then restart with the factory default
settings.
Click the firmware file
Click Ok to reset the NVR to factory default settings
Click Upgrade
Maintenance
81