Step 3 Of 4: Enable Ddns On The Nvr - Lorex LNR300 Instruction Manual

Appendix C: DDNS Setup (Advanced)
• URL Request: Enter the web site address that will be used to connect to your Lorex product.
For example, if you enter
tomsmith.lorexddns.net
9 Click Save to register your product for DDNS. A confirmation email will be sent to the email
address used to register for My Lorex.
You will need this information to enable remote access to your system. Record your
information below:
Domain name/URL Request:
DDNS User Name:
Device DDNS password:

Step 3 of 4: Enable DDNS on the NVR

To enable DDNS on your NVR:
1 Right-click and then click Menu>Configuration>Network>DDNS.
2 Check Enable DDNS.
3 Configure the following:
• DDNS Type: Select LorexDDNS.
• Device Domain Name: Enter the Domain Name/URL Request you received in the confirmation
email after you set up your DDNS account.
• User Name: Enter the DDNS User Name from the confirmation email.
• Password: Enter the DDNS Device Password from the confirmation email.
4 Click Apply to save changes. Right-click repeatedly to return to live view.
168
, the address to access your video will be 
tomsmith
.
tomsmith
tsmith01
******
Check to enable DDNS
Enter Domain Name/URL
Request
Enter DDNS User Name
Enter DDNS Device Password