Connecting Cameras Over The Local Network On 4/8-Channel Models (Advanced) - Lorex LNR300 Instruction Manual

4 Check the cameras you would like to add to the NVR and click Quick Add. Right-click
repeatedly to return to live view.
NOTE: IP cameras connected to the local network may only be assigned to channels 9~16.
Connecting Cameras Over the Local Network on 4/8-Channel Models
(Advanced):
Because all the channels are assigned to the PoE ports on 4/8-channel NVRs, you cannot
add cameras to the NVR using the steps for 16-channel models. You must override the
settings for the PoE channels to connect cameras over the local network.
To connect cameras over the local network on 4/8-channel models:
1 Right-click and click Menu. Enter the NVR's user name (default: admin) and password
(default: 000000) and click OK.
2 Click Camera.
3 Click Search. The NVR scans for IP cameras on your local network.
4 Write down the IP addresses of the camera(s) you would like to add.
Connecting Cameras over the Local Network
Click Search
Check the cameras
Click Quick Add
Write down the camera
IP address
11