Configuration
3
Click Configuration.
4
Under Auto Logout, select the amount of time menus will remain open while the system is
idle or select Never to disable auto logout.
5
Click Apply to save changes. Right-click repeatedly to return to live view.
Pairing the Remote Control
The remote control comes pre-paired to your NVR. If you have more than one NVR, you can
pair the remote control to a specific NVR.
To pair the remote control to an NVR:
1
Right-click and then click Menu.
2
Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3
Click Configuration>General>More Settings.
4
Click Device No. and then enter a unique ID for your NVR.
5
Click Apply to save changes. Right-click repeatedly to return to live view.
6
On the remote control, press DEV. Then, press the number you selected in step 3 and press
Enter. Your remote control will now be paired with the NVR.
Adjusting BNC Video Out Brightness (16-Channel Only)
On the 16-channel model, you can adjust the brightness for a monitor connected to the
Video Out (BNC) port.
To adjust the video out brightness for the BNC monitor:
1
Right-click and then click Menu.
2
Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3
Click Configuration>General>More Settings.
68
Select the Auto Logout time
Enter a unique ID
number for you NVR