Client Software for PC or Mac
Modifying Cameras or Camera Groups
You can change the name of a camera or camera group that is used in the client software.
To modify a camera or camera group:
1
Click the camera or camera group on the left then click Modify.
2
Enter a new name for the camera or camera group and then click Yes.
Deleting Cameras or Camera Groups
• Click the camera or camera group you would like to delete and click Delete. Click Yes
Local Log Search
The Local Log Search allows you to search for logs from your NVRs.
To search for logs:
1
From the Control Panel, click Local Log Search (
2
Configure the following search options:
• Log Type: Select Alarm for motion detection alarms and system warning logs, Operation for
operations logs, such as configuration changes, or System for logs of user access to the
system (e.g. log-ins and log-outs).
• Minor Type: Select All to search for all logs in the Log Type you have selected or select a
specific type of log to search for.
• User Name: Select All Users to search for logs generated by all users or select a specific
user to see logs generated by that user.
106
Click Modify
Click camera or
camera group
Click Delete
Click camera or
camera group
).