Changing System Ports - Lorex LNR300 Instruction Manual

Configuration
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Configuration>Network>DDNS.
4 Check Enable DDNS.
5 Configure the following:
• DDNS Type: Select LorexDDNS.
• Device Domain Name: Enter the Domain Name/URL Request you received in the confirmation
email after you set up your DDNS account.
• User Name: Enter the DDNS User Name from the confirmation email.
• Password: Enter the DDNS Device Password from the confirmation email.
6 Click Apply to save changes. Right-click repeatedly to return to live view.

Changing System Ports

The NVR's default Client Port is 8000, the default HTTP Port is 80, and the default Mobile
Port is 1025.
To change system ports:
1 Right-click and then click Menu.
2 Enter the system user name (default: admin) and password (default: 000000) and click Yes.
3 Click Configuration>Network>More Settings.
4 Configure the Server Port, HTTP Port, and Mobile Port as needed.
5 Click Apply to save changes. Right-click repeatedly to return to live view.
NOTE: If you have completed router port forwarding, you will need to re-configure your router
to forward the newly selected ports.
72
Check to enable DDNS
Enter Domain Name/URL
Request
Enter DDNS User Name
Enter DDNS Device Password
Enter Server port
Enter HTTP port
Enter Mobile port